 |
|
|
| SCSI-3194UW is single-chip 32 bit PCI Bus Plug and Play Ultra Wide SCSI Host Adapter to be used in the PC which has a free PCI bus slot. It is designed has a low-cost high performance SCSI host adapter with BIOS for SCSI devices such as Hard Disk Drive, CD-ROM, MO, WORM, CD-R and flat-bed scanner, tape drive etc. With abundent drivers supporting for ASPI and SCAM, SCSI-3194UW can work under major operating systems such as MS-DOS, Win 3.1, win95, Win NT, OS/2 Warp, Novell Netware, SCO Unix, SCO UNIXWARE etc. SCSI-3194UW can connect up to 15 SCSI devices through internal 50 or 68 pin headers or an external 68-pin high density connector. With embedded high-speed 64-byte FIFO buffers that allow concurrent data transfer on host bus and SCSI bus. It can sustain an asychronous transfer rate to 10 MB/Sec. And burst up to 40 MB/Sec. at synchronous mode.
| Features |
- Low-cost high performance single-chip Ultra SCSI Host Adapter.
- PCI 2.1 Compliant.
- Support full 32 bit PCI Bus Master, with zero wait state mode can burst data up to 132 MB/Sec.(@33MHz)
- Built in 1 Mbits EPROM/Flash ROM(option).
- Supports Command Tag Queueing, Sync./Asynch.Transfers, Disconnects and Reconnects.
- Supports Plug and Play.
- Supports EEPROM.
- CE and FCC Class B Certified.
|
| Specifications |
| Bus |
PCI Local Bus 32 bit DMA Mode |
SCSI Bus |
Single-ended |
| SCSI Protocol |
SCSI-I, SCSI-II, SCSI-III |
SCSI Terminator |
Auto and Programmable |
| SCSI Transfer rate |
10MB/Sec. Asynchronous, 40MB/Sec. Synchronous |
Operating Temperature |
0-55 Deg. C |
| Max SCIS devices connection |
15 |
Relative Humidity |
10-95% non-condensing |
| Internal SCSI connector |
50 pin header and 68 pin high-density connector |
External SCSI connector |
68-pin High Density. |
| Certification |
CE and FCC class B. |
PCB Dimension |
97.0 X 158.0 mm
|
| Driver Set |
| MS-DOS / Win 3.1 |
Win 95 |
| Win NT 3.5X/4.X |
OS/2 Warp. |
| SCO UNIX 3.2V 4.2 |
Novell Netware 3.X/4.X |
| UNIXWARE 2.X |
OS/2 Warp. | |
|
|
.gif){kind=tracking}
Home
